CyberPower PDU15SW8RNET User Manual

PowerPanel® Business Edition User’s Manual Rev. 6 2011/10/04

PowerPanel™ Business Edition 9 z Choose the component. If one single computer connected to the UPS directly via a USB or se

PowerPanel™ Business Edition 99 z Right click the target datastore and click Browse Datastore. z Click Upload button on the

PowerPanel™ Business Edition 10 z Choose the start menu directory. z Click the Finish button to complete the installation

PowerPanel™ Business Edition 11 Installation on Linux The installer is used to install the Client and requires root permissi

PowerPanel™ Business Edition 12 z Accept the license agreement. z Choose the component. If one single computer connected

PowerPanel™ Business Edition 13 z Choose the destination directory. z The daemon ppbed will start during installation.

PowerPanel™ Business Edition 14 z Click the Finish button to complete the installation. Note: If the Linux installation ne

PowerPanel™ Business Edition 15 Installation for ESX server must be launched in the Service Console (aka Console Operation Sy

PowerPanel™ Business Edition 16 z Choose the destination location. z Installation procedure starts to process until the i

PowerPanel™ Business Edition 17 The local and remote login pages are the same. Selecting the Remember me on this computer op

PowerPanel™ Business Edition 18 z Set the port used by Client on the Security/Network page to match the port used by the Age

PowerPanel™ Business Edition 1 ELECTRONIC END USER LICENSE AGREEMENT FOR CYBERPOWER POWERPANEL BUSINESS EDITION NOTICE TO USE

PowerPanel™ Business Edition 19 In Client, the Summary page provides an overview of the system, including the communication s

PowerPanel™ Business Edition 20 UPS/Status page Input z Status: Displays the present status of the utility power supplied t

PowerPanel™ Business Edition 21  Bypass: The UPS has switched to bypass mode and the utility power is being supplied direct

PowerPanel™ Business Edition 22  Normal: The batteries are working normally. z Voltage: The present voltage supplied by th

PowerPanel™ Business Edition 23 z UPS Type: The type of the UPS. e.g. On-Line, Line Interactive or Sinewave Line Interactive

PowerPanel™ Business Edition 24 Supplied Power z Voltage: Sets the output voltage which is supplied to the connected equipme

PowerPanel™ Business Edition 25 UPS will supply battery power to connected equipment. Note: High/Low Utility Voltage Threshol

PowerPanel™ Business Edition 26 restored, the UPS will switch to normal operation immediately. This option can be used to pre

PowerPanel™ Business Edition 27 z Energy Saving: When the utility power fails, the batteries will start discharging. If this

PowerPanel™ Business Edition 28 NCL Outlet NCL stands for Non-Critical Load. Under the following conditions, the UPS will tur

PowerPanel™ Business Edition 2 CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATIO

PowerPanel™ Business Edition 29 Battery Test The Battery Test performs a battery test to verify that the batteries are good,

PowerPanel™ Business Edition 30 The details will be reported after an alarm test is complete: z Last Processing Date: The da

PowerPanel™ Business Edition 31 Users can manage connected loads and outlets from the Load Management page. All connected equ

PowerPanel™ Business Edition 32 Client computer is printed in gray when the communication is not established The equipment d

PowerPanel™ Business Edition 33 Information Power/Information page The Power/Information page shows information about the UP

PowerPanel™ Business Edition 34 z Contact: Who to contact about the UPS/PDU. z MAC Address: The MAC address of the UPS RMCA

PowerPanel™ Business Edition 35 The Client searches the device with the least uptime to be a default power device after an in

PowerPanel™ Business Edition 36  Negotiation: The Client is attempting to communicate with the power device at the specifie

PowerPanel™ Business Edition 37 z Verify that firewall settings. Port 3052(UDP/TCP), port 53568(TCP), port 162(UDP) and port

PowerPanel™ Business Edition 38 An event is generated when the UPS/PDU encounters specific power conditions. The PowerPanel®

PowerPanel™ Business Edition 3 Table of Contents Introduction ...

PowerPanel™ Business Edition 39 The administrator can be notified when an event occurs. See Event Action/Notification Recipie

PowerPanel™ Business Edition 40 The settings of UPS is faulty event would be applied with the settings of the Battery capaci

PowerPanel™ Business Edition 41 When the UPS switches to battery mode due to power event, the battery power will be supplied

PowerPanel™ Business Edition 42 The load level is near the maximum safe load for the PDU. z Input is overloaded - A PDU is

PowerPanel™ Business Edition 43 z Modify the recipient: Select the recipient you wish to modify. After entering in the new d

PowerPanel™ Business Edition 44 The dots and the line indicate the specific time and day of the week to notify the recipient

PowerPanel™ Business Edition 45 The Client will warn users there is insufficient time for a complete shutdown in the PDU. z

PowerPanel™ Business Edition 46 z SMTP server address: Configure the SMTP server that will be used to send E-mail to a recip

PowerPanel™ Business Edition 47 XMPP Instant Messaging service To use XMPP Instant Messaging, users must provide a unique XM

PowerPanel™ Business Edition 48 Linux Message Linux Message z Activate: Specify whether the Agent and Client can use this s

PowerPanel™ Business Edition 4 Event Logs ...

PowerPanel™ Business Edition 49 EVENT_ACTION_PHONE_NUMBER as recipient's mobile phone number and EVENT_ACTION_MESSAGE as

PowerPanel™ Business Edition 50 Logs/Event Logs page lets you view logs that record power event details in the Agent or the C

PowerPanel™ Business Edition 51 A pop-up status window is displayed from the selected event. Filter The following filter opt

PowerPanel™ Business Edition 52 Logs/Status page Additional log pages can be accessed by selecting Previous and Next in the

PowerPanel™ Business Edition 53 z Days: Selects the day(s) for the status records to be displayed. The dropdown menus next t

PowerPanel™ Business Edition 54 z Clear All Records: When this option selected with Yes, Now, all record status logs will be

PowerPanel™ Business Edition 55 z Create schedule: Select the New Schedule shortcut to have the blank fields or use the data

PowerPanel™ Business Edition 56 Note: If the computer bios is set to boot when power restores, the computer will automaticall

PowerPanel™ Business Edition 57 Change Password z Enter the password in the Current Password field. z Select the Change Pa

PowerPanel™ Business Edition 58 If the Client establishes communication with Agent, UPS RMCARD202 or PDU whose model name is

PowerPanel™ Business Edition 5 Introduction PowerPanel® Business Edition (PPBE) software provides comprehensive advanced powe

PowerPanel™ Business Edition 59 Network/Access Control page in the UPS RMCARD201 web If the community has write permission,

PowerPanel™ Business Edition 60 Network/Trap Notification page in the UPS RMCARD201 web Note: The SNMP community is limited

PowerPanel™ Business Edition 61 Network page PowerPanel Business Edition allows users to change the secure level and port ex

PowerPanel™ Business Edition 62 Users may have to ignore these warning and continue the web access. Below illustration are th

PowerPanel™ Business Edition 63 Second, select Permanently store this exception option and click Confirm Security Exception b

PowerPanel™ Business Edition 64 Safari displays the security certification alert. Note: The performance will be lower once a

PowerPanel™ Business Edition 65 Help Content The Content page provides an overview which introduces the brief functions of wh

PowerPanel™ Business Edition 66 Using PowerPanel Business Edition Center Management Power Equipment Power Equipment page has

PowerPanel™ Business Edition 67 These three buttons will allow users to add groups, add devices or expand all groups. Add

PowerPanel™ Business Edition 68 Each node can be one of the following types: A UPS. This UPS may have an RMCARD or is connec

PowerPanel™ Business Edition 6 be switched off, the Client will perform a shutdown prior to switching off the power. Refer to

PowerPanel™ Business Edition 69 Device Management Add Device In order to monitor and control UPS/PDU it first must be added t

PowerPanel™ Business Edition 70 Note: Center can simultaneously monitor a maximum of 25 UPS/PDU. Move Device Highlight the d

PowerPanel™ Business Edition 71 z Address: The IP address of the UPS RMCARD, PDU or Agent computer’s network interface. z P

PowerPanel™ Business Edition 72 z UPS Type: The type of the UPS. e.g. On-Line, Line Interactive or Sinewave Line Interactive

PowerPanel™ Business Edition 73 A confirmation window of a PDU power off operation z Power On: Click Power On to have the U

PowerPanel™ Business Edition 74 Group Management UPS/PDUs can be grouped for easy management. Orders can then be issued to mu

PowerPanel™ Business Edition 75 Summary tab of Details Each group provides the statistics of all UPS/PDU from the Summary ta

PowerPanel™ Business Edition 76 z Power Off: Click Power Off and a confirmation window will appear. Pick the UPS/PDU from th

PowerPanel™ Business Edition 77 A confirmation window of a bulk power cycle operation Battery Test Only UPS units can perfor

PowerPanel™ Business Edition 78 z Select Show Outlets from the context menu of the UPS to expand all outlets. z Select the

PowerPanel™ Business Edition 7 Getting Started Prerequisites Hardware Limitation z 733 MHz or higher Pentium-compatible CPU.

PowerPanel™ Business Edition 79 Settings The Settings tab allows you to configure powered equipment. z Enabled: If this opti

PowerPanel™ Business Edition 80 IT Equipment page Toolbar The Toolbar provides device states and buttons to expand, add grou

PowerPanel™ Business Edition 81 Indicates that there are no problems with this device. Node Components Each node is named an

PowerPanel™ Business Edition 82 Add Group button on toolbar Or click the Add Group item to create a new sub-group from the c

PowerPanel™ Business Edition 83 Each group provides information about the communication state or the computer type from the S

PowerPanel™ Business Edition 84 Add Computer/Equipment item on the context menu Select the computers or equipment you wish

PowerPanel™ Business Edition 85 IT Equipment Details Summary tab of Details window of printer IT Equipment z Name: The name

PowerPanel™ Business Edition 86 Power Control z Power Off: Select Power Off from the context menu. Decide whether to turn of

PowerPanel™ Business Edition 87 Logs page Each log has details which can be viewed by clicking the icon next the each log. U

PowerPanel™ Business Edition 88 If the Center establishes the communications with below devices, refer to SNMP Community and

PowerPanel™ Business Edition 8 Note: Because of the abundance of different Linux builds, not all builds are tested with Power

PowerPanel™ Business Edition 89 About Please refer to Help/About section about further details. Logout The Logout page allows

PowerPanel™ Business Edition 90 z Verify the settings on the Security/Authentication page are correct and match the settings

PowerPanel™ Business Edition 91 } } Set both minimum_font_size and minimum_logic_font_size to 10 in order to display the page

PowerPanel™ Business Edition 92 z Find the PowerPanel Business Edition service at the Control Panel/Administrator Tools/Ser

PowerPanel™ Business Edition 93 Click the Identify button at the Outlet block screen. The PDU LCD screen will blink the outle

PowerPanel™ Business Edition 94 compare the key OCCUR to identify an event that has occurred or FINISH to identify an event t

PowerPanel™ Business Edition 95 z If the model name conforms to the format of “OLxxxxRMXL”, “OLxxxx”, it belongs to Smart Ap

PowerPanel™ Business Edition 96 z Click Add button of the VMware Machine Properties to add a USB controller. z Select USB

PowerPanel™ Business Edition 97 z This will add a USB Controller, click Next to add a USB Device. z Select New USB Control

PowerPanel™ Business Edition 98 z Select USB Device item and click Next to proceed. z Select the USB Device of the target