CyberPower VALUE2200E-GP User Manual download pdf (Page 2)

Functional Test

AC Mode

The UPS delivers power to the loads derived from the utility and maintains proper battery charge. It also

regulates the output voltage to within a narrow range.

On-Battery Mode

The UPS operates on battery when the line voltage or frequency has fallen outside the limits. Local

users are alerted to this mode of operation by visual and audible indicators. The UPS provides power to

the load from the battery and through its inverter and the output voltage and frequency of the UPS are

regulated within a narrow range

1. Switch On

Press the power switch on the front panel then the status LCD will light up.

2. Switch Off

Press again the power switch, the status LCD on the front panel will go off.

3. Cold Start / Start on Battery:

This UPS can be turned on even when AC is not present.

Press the power switch on the front panel then the status LCD will light up.

ROUTINE MAINTENANCE AND STORAGE

ROUTINE MAINTENANCE

1. Use dry soft clothes to clean the front panel and plastic parts. Do not use any detergent that

contains alcoholic ingredient.

2. The expected lifetime of the battery is around 3 years. Improper operation and harsh environment

will reduce the actual lifetime.

3. Unplug the UPS from power inlet if the UPS will not operate for long period of time.

STORAGE

1. First turn off your UPS and disconnect its power cord from the wall outlet. Disconnect all cables

connected the UPS to avoid battery drain.

2. The UPS should be stored in a cool dry location.

3. Make sure the battery is fully charged before the UPS is stored.

4. For extended storage in moderate climates, the battery should be charged for 12 hours every 3

months by plugging the power cord into the wall receptacle and turning on the main switch. Repeat

it every 2 months in high temperature locations.

TROUBLE SHOOTING

Problem Possible Cause Solution

Batteries are not fully

charged.

Recharge the battery by leaving the UPS

plugged in.

The UPS does

not perform

expected

runtime.

Battery is slightly worn out.

Contact CyberPower Systems at

[email protected]

The on/off switch is

designed to prevent

damage by rapidly turning it

off and on.

Turn the UPS off. Wait 10 seconds and

then turn the UPS on.

The unit is not connected to

an AC outlet.

The unit must be connected to a

220-240V 50/60Hz outlet.

The battery is worn out.

Contact CyberPower Systems at

[email protected]

The UPS will not

turn on.

Mechanical problem.

Contact CyberPower Systems at

[email protected]

Circuit breaker is tripped

due to overload

Turn the UPS off and unplug at least one

piece connected equipment. Unplug the

power cord of the UPS then press the

circuit breaker knob.

Batteries are discharged

Allow the unit to recharge for at least 4

hours.

Outlets do not

provide power to

equipment

Unit has been damaged by

a surge or spike.

Contact CyberPower Systems at

[email protected]

The serial/USB cable is not

connected.

Connect the serial/USB cable to the UPS

unit and an open serial port on the back

of the computer. You must use the cable

that came with the unit.

The serial/USB cable is

connected to the wrong

port.

Try another serial/USB port of your

computer.

The unit is not providing

battery power.

Shutdown your computer and turn the

UPS off. Wait 10 seconds and turn the

UPS back on. This should reset the unit.

PowerPanel®

Personal Edition

is inactive (all

icons are gray).

The serial cable is not the

cable that was provided with

the unit.

You must use the cable included with the

unit for the software.

CyberPower warrants to you, the original purchaser, that CyberPower UPS will be free from defects in

design, assembly, materials and workmanship for two years ( battery is only one year) from the date of

original purchase. Any warranty services, please contact your local dealers or distributors.

TECHNICAL SPECIFICATIONS

Model Value 1200E Value 1500E Value 2200E

Capacity (VA) 1200VA 1500VA 2200VA

Capacity (Watts) 720W 900W 1320W

Input

Input Voltage Range 160VAC~270VAC

Frequency Range 50/60Hz +/-3Hz(Auto Sensing)

Output

On Battery Output

Voltage

Simulated Sine Wave at 230Vac +/-7%

On Battery Output

Frequency

50/60 Hz

Overload Protection On Utility: Circuit Breaker, On Battery: Internal Current Limiting

Physical

Total # of UPS

Receptacles

(6) IEC 320 C13

Maximum Dimensions 32.6cm(L)

14.cm(W)

18cm(H)

Weight 13.0 kg / 28.6 Lbs 14.3 kg / 31.5 Lbs 15.4 kg / 33.9 Lbs

Battery

Sealed Maintenance

Free Lead Acid Battery

12V / 7Ah x2 12V / 8.5Ah x2 12V / 9Ah x2

Typical Recharge Time 8 Hours

Warning Diagnostics

Indicators Power On, UPS Status Display, Capacity Display, Digital Value

Display

Audible Alarms On Battery, Low Battery, Overload

Environmental

Operating Temperature +32°F to 104°F ( 0°C to 40°C )

Operating Relative

Humidity

0 to 95% NON-CONDENSING

Communication

PowerPanel

Personal

Edition Software

Windows 98/ME/2000/NT/XP/Vista

Management

Auto-Charger Yes

Auto-Restart Yes

USB Yes

DEFINITIONS FOR ILLUMINATED LCD INDICATORS

LCD Indication

Line mode

UPS Status Display Capacity Display Digital Value Display

Select SW

Press

Load

Cap.

Battery

Cap.

Input

Voltage

Output

Voltage

Run

Time

of Load

of Batt.

Initial V X -- X V X V

1st V X -- X V X V

2nd V X -- X V X V

3rd V X -- X X V V

4th V X -- X V X V

5th(Return) V X -- X V X V

Press >3sec

(Sound Disable)

V X V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

V X X X -- -- -- -- -- -- --

(Overload) V X -- V -- -- -- -- -- -- --

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

Battery mode

UPS Status Display Capacity Display Digital Value Display

Select SW

Press

Load

Cap.

Battery

Cap.

Input

Voltage

Output

Voltage

Run

Time

of Load

of Batt.

Initial X V -- X X V V

1st X V -- X X V V

2nd X V -- X V X V

3rd X V -- X X V V

4th X V -- X X V V

5th(Return) X V -- X X V V

Press >3sec

(Sound Disable)

X V V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

X V X X -- -- -- -- -- -- --

(Overload) X V -- V -- -- -- -- -- -- --

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

For more information, visit eu.cyberpowersystems.com or contact

CyberPower Systems B.V.

Flight Forum 3545 5657DW Eindhoven The Netherlands

Tel: +31 40 2348170, E-MAIL:

[email protected]

CyberPower Systems Inc. (USA) 4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.

Tel: +1 952 4039500, Fax: +1 952 4030009, E-MAIL:

[email protected]

or in part without permission is prohibited. PowerPanel

and PowerPanel

Plus are trademarks of

CyberPower Systems (USA) Inc.

1 2

1200E/1500E/2200E 1
User’s Manual 1

Comments to this Manuals

No comments

CyberPower VALUE2200E-GP User Manual Page 2

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) CyberPower VALUE2200E-GP