1
©2014. CyberPower Systems, Inc. All rights reserved.
Switched Series Metered/Monitored Series
1U 1U
PDU15SW10ATNET PDU15M10AT
PDU20SW10ATNET PDU20M10AT
PDU20SWT10ATNET PDU20MT10AT
PDU20SWHVT10ATNET PDU20MHVT10AT
PDU15SWHVIEC12ATNET PDU15MHVIEC12AT
PDU20SWHVIEC10ATNET PDU20MHVIEC10AT
PDU20SWHVCEE10ATNET* PDU20MHVCEE10AT*
2U 2U
PDU30SWT17ATNET PDU30MT17AT
PDU30SWHVT19ATNET PDU30MHVT19AT
*Selected models may not be available in certain regions. Please contact your
CyberPower sales team for more information.
Overview
Model List
CyberPower Automatic Transfer Switches PDUs with dual input for power provide
redundant and increased reliability for critical devices with a single power plug.
Users can define the preferred input power source. When a selected source is
unstable or unavailable, the ATS PDU will switch to the second power source to
constantly provide power to connected devices. The entire ATS PDU series are
designed with LED and LCD interfaces for users to easily observe power status and
device load. On-site power management is accomplished as users can configure
power settings, via LCD interface, according to local power condition. Available in
both switched and metered/monitored configurations, users have a broad base of
options to select the ATS PDU that best fits their needs.
Safety Precautions
Read the following before installing or operating the
Automatic Transfer Switches (ATS PDU):
• Use only the supplied hardware to attach the mounting brackets.
• The ATS PDU must be plugged into a single phase three-wire, grounded
outlet on a circuit that is protected by a fuse or circuit breaker. For
PDU15xxxxx series, please use 15A circuit protector. For PDU20xxxxx series,
please use 20A circuit protector. For PDU30xxxxx series, please use 30A
circuit protector. Connection to any other type of power outlet may result in
a electrocution hazard.
• Do not use extension cords or adapters with these ATS PDUs.
• Never install an ATS PDU or associated wiring or equipment during a lightning
storm.
• Ensure that the power cord, plug, and socket are in good condition.
To prevent the risk of fire or electrocution, this ATS PDU should be installed in a
temperature and humidity controlled indoor area free of conductive contaminants. Do
not install this ATS PDU where excessive moisture or heat is present.
Before using, please check to ensure the package contains all the items shown below.
If there are missing parts, please contact your local CyberPower sales team for
technical support.
Check
(11 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals