CyberPower Remote Management System
22
User Name
The name to identify SNMPv3 user. The field must be
1 to 31 characters length.
Authentucation Password
The password used to generate the key used for
authentication. The field must be 16 to 31 characters
length.
Privacy Password
The password used to generate the key used for
encryption. The field must be 16 to 31 characters
length.
IP
The IP address or IP address mask can be accessed
by NMS. A specific IP address allows access only by
the NMS with the specified IP Address. The 255 is
regarded as the mask and the rules list as follows:
‧192.168.20.255: Access only by an NMS on the
192.168.20 segment.
‧192.255.255.255: Access only by an NMS on the
192 segment.
‧0.0.0.0 (the default setting) or 255.255.255.255:
Access by any NMS on any segment.
Authentucation Type
The hash type for authentication.
Privacy Type
The type for encrypting and decrypting data.
[System->Network Service->Web Service] Select Enable to allow access to the HTTP or
HTTPS(HW V2.0 above only) Service and configures the TCP/IP port for them. Use the “Valid
Certificate” to browse the detailed information of HTTPS Certification；use the “upload
Certificate” to upload and replace the HTTPS Certification.
Note: The format of uploading certificate must in a standard PEM(Privacy Enhanced Mail).
[System->Network Service->Telnet Service] Selects Enable to allow access to the Telnet
Service and configures the TCP/IP port that Telnet uses to communicate (23 by default).
Note: To enhance security, users can change port setting to any unused port from 5000 to
65535. Users must then specify the non-default port to obtain access. Telnet clients
require users to append either a space and the port number or a colon and the port
number to the command line to access the control console.
[System->Network Service->FTP Service] Allows users to Enable/Disable the FTP server
service and configure the TCP/IP port of the FTP server (21 by default).
Note: The FTP server is used for upgrading Firmware. For more details about the upgrade
process, please refer to “Firmware Upgrade” section.
[System->Notifications->Event Action]
Display the event actions for each event. Users can
click on the event to modify its action. When a specific event happens, the user can be notified by
the corresponding method according to this list.
(13 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals