CyberPower RMCARD202 User Manual download pdf (Page 29)

CyberPower Remote Management System

Firmware Upgrade

By upgrading the Firmware, you can obtain both the new features and updates/improvements to

existing functionality. There are two files to update in order to upgrade the firmware version.

RMCARD202/RMCARD203 upgrade files:

(HW V2.0)

- A. cpsrm2sbfw_XXX.bin

- B. cpsrm2sbdata_XXX.bin

(HW V1.0)

- A. cpssnmpfw_XXX.bin

- B. cpssnmpdata_XXX.bin

RMCARD302/RMCARD303 upgrade files:

(HW V2.0)

- A. cpsrm3sbfw_XXX.bin

- B. cpsrm3sbdata_XXX.bin

(HW V1.0)

- A. cpsrm302afw_XXX.bin

- B. cpsrm302adata_XXX.bin

Use the following steps to upgrade the firmware.

1. Download the latest Firmware

2. Extract the file to “C:\”

3. Open a command prompt window

4. Login to the CyberPower Remote Management Card with FTP command, type

- ftp

- ftp> open

- To [current ip of RMCARD] [port]; EX: To 192.168.22.126 21

- Input USER NAME and PASSWORD (same as the administrator account in Web

interface default : cyber ; cyber)

5. Upgrade the file A, type

ftp > bin

ftp > put A

(RMCARD202 for ex., put cpssnmpfw_XXX.bin)

6. Upgrade complete, type

ftp > quit

7. The system will reboot after you type “quit”

8. Login to the FTP again as step 4.

9. Upgrade the file B, type

ftp > bin

ftp > put B

(RMCARD202 for ex., put cpssnmpdata_XXX.bin)

10. Upgrade complete, type

ftp > quit

11. The system will reboot after you type “quit”

You can check to see if the firmware upgrade was successful by checking the ”Firmware version”

on the [System->About] webpage.

Note: Please do not turn the UPS off when processing the Firmware upgrade.

1 2 ... 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

CyberPower RMCARD202 User Manual Page 29

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) CyberPower RMCARD202