CyberPower PDU20SW8RNET User Manual download pdf (Page 126)

124

13. I try to set the Client to establish to communication with one of PDUs. How do I identify the targeted

device IP?

Refer to the Easy-to-Setup Device IP for details.

14. How do I ensure that the SNMP settings between the Client and UPS/PDU/ATS are properly setup?

To receive the trap notification from the UPS/PDU/ATS all the time, follow steps to verify the SNMP settings:

 Open the Network/Trap Notification page on the UPS/PDU/ATS web and the Security/Authentication page

on the Client.

 Confirm that the IP address of the Client can be found on the Network/Trap Notification page of the

UPS/PDU/ATS web. If the IP address can be searched, skip the step 3.

 If the IP address of the Client could not be found, click the Trap Receiver shortcut of the Network/Trap

Notification page to enter the Trap Configuration page. Enter the required data to add a new trap receiver.

 If the IP address of the Client could be found, verify the SNMP settings are matched.

15. How do I determine that if my computer is using hibernation or not?

If the operating system is Windows 2000, Windows XP or Windows Server 2003, please follow the below steps

to enable the hibernation:

 Open Power Options in the Control Panel. (Go to Start > Control Panel > Power Options.)

 Click the Hibernate tab, and then select the Enable hibernate support option. Click the OK button to close the

Power Options dialog box. The hibernation has been enabled. If the tab is not available, your computer

doesn’t support this hibernation.

If the operating system is Windows Vista, Windows 7, Windows Server 2008, Windows 8 or Windows

Server 2012 please follow the below steps to enable the hibernation.

 Open the Command Prompt dialog box.

 Use the command powercfg.exe -hibernate on to enable the hibernation.

16. Which series does my UPS model belong to?

Check the UPS model and determine to which series your UPS belongs:

 If the model name conforms to the format of “OLxxxxRMXL”, “OLxxxx”, it belongs to Smart App Online

series.

 If the model name conforms to the format of “PRxxxxLCDRM”, “PRxxxxLCDRT”, “PPxxxxSWRM” or

“PPxxxxSW”, it belongs to Smart App Sinewave series.

 If the model name conforms to the format of “ORxxxxLCDRM” or “ORxxxxLCDRT”, it belongs to Smart

App Intelligent LCD series.

 If the model name conforms to the format of “OPxxxx” or “CPSxxxxAVR”, it belongs to Smart App AVR

series.

 If the model name conforms to the format of “OLxxxxTEXL” or “OLxxxxEXL-M”, it belongs to Paragon

Tower series.

 If the model name conforms to the format of “PRxxxxELCDRT” or “PRxxxxELCDRTXL”, it belongs to

Professional Rack Mount LCD series.

 If the model name conforms to the format of “PRxxxxE”, it belongs to Professional Rack Mount series.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 126