CyberPower PDU20SW8RNET User Manual download pdf (Page 21)

 Click Power on the virtual machine to power on the virtual appliance.

 Login the virtual appliance. The default username and password are admin. In order to perform shutdown

accurately, you must change the time zone settings of the virtual appliance.

This can be a direct copy of the time zone file from the /usr/share/zoneinfo folder. We assume that the host is

located under the Chicago CST zone in Chicago, and the time zone can be changed by running the command cp

/usr/share/zoneinfo/America/Chicago /etc/localtime.

Installation on XenServer

The installer requires root permission to install the PowerPanel

Business Edition. Mount CD by running mount –t

iso9660 /dev/cdrom /mnt/cdrom as a root user (/dev/cdrom is the CD drive and /mnt/cdrom will be the mount

point.). Browse the CD drive and run ./ppbe-linux-x86.sh command to initiate an installation procedure.

Installation must be launched on the Dom0. Refer to Installation on Text Mode section to complete the installation.

Agent should be installed on the Dom 0 of XenServer 5 or later versions. Citrix XenServer 5.0 and later versions

support USB device. Before installing Agent with the USB or serial connection, make sure that the platform running

the Agent supports USB or serial connection.

Installation on Hyper-V Server

Use the PowerPanel

Business Edition installation CD to complete the installation on the target computer. Run the

<CD_Drive>\Software\Windows\setup.exe of the command prompt such as below illustration to start the installation

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 21