CyberPower PDU20SW8RNET User Manual download pdf (Page 89)

decreasing the utility voltage.

Test. A battery test is processing.

Batteries can have the following states when UPS is operating:

Normal. Batteries are not being using.

Not Present. Batteries are absent and there is no battery power.

Charging. Batteries stops discharging due to a power event and are being

charged.

Discharging. The UPS is supplying battery power to its load.

Fully Charged. Batteries are at 100% capacity.

UPS/PDU/ATSs have the following states according to their current load:

No Load. There is no output load.

Low Load. The PDU is in a low load condition.

Normal. The output power is normal.

Near Overload. The PDU is near the overload condition.

Overload. Output consumption of equipment exceeds the rating load on UPS

or the PDU is in an overload condition.

PDU also have a state to indicate whether outlet is turned on or off:

Indicates this outlet is turned on.

Indicates this outlet is turned off.

ATS have the following states on functioning:

ATS uses this input source as current source, and this source is normal.

ATS uses this input source as redundant source, but this source is normal.

ATS uses this input source as current source, and this source is power

failure.

ATS uses this input source as redundant source, but this source is power

failure.

The sensor on the UPS/PDU/ATS has the following states according to the environment temperature:

Normal. Indicates the temperature measured by the sensor is in a predefined

normal range.

Overheated. Indicates the current temperature exceeds the high temperature

threshold.

Undercooled. Indicates the current temperature violates the low temperature

threshold.

The sensor on the UPS/PDU/ATS has the following states according to the relative humidity:

Normal. Indicates the humidity as a percentage measured by the sensor is in

a predefined normal range.

Over wet. Indicates the current humidity exceeds the high humidity

threshold.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 89