CyberPower PDU20SW8RNET User Manual download pdf (Page 100)

A confirmation window of a bulk power cycle operation

Note: If a group contains the UPS systems which has connected with PDU units, a power cycle or a power off to the

selected group will result in computers shutdown on the PDU units.

Battery Test

Only UPS units can perform a battery test. Click Battery Test from the context menu of the selected group. All UPS

units in that group will be listed in the confirmation window. Click OK to initiate the battery test on all selected UPS

units.

Mute

Click Mute from the context menu to mute the alarm.

Alarm

Click Alarm from the context menu to enable or disable the UPS alarm.

IT Equipment Details

IT equipment is computers which have PowerPanel

Agent or Client installed, or generic equipment that has power

supplied by a UPS/PDU/ATS. Center provides the following options to attach new equipment to an outlet, attach

existing equipment from another outlet or another device, detach unused equipment and rename equipment

Attach New Computer

When a new computer running Agent or Client is plugged into a UPS/PDU/ATS, it should be assigned to the correct

outlet. Example: A computer running Client connects to outlet #1 on a PDU. The Client should be assigned to an

outlet by the following steps:

 Select Show Outlets item from the context menu of the PDU to expand all outlets.

 Select the Settings tab in the Details window from the context menu of the correct outlet.

 Click the Enabled option and Installed PPBE Client then enter the Client’s IP address. Click OK to attempt to

establish communication. After the process is successful the Name, Location, and Contact will be updated.

Attach New Generic Equipment

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 100