CyberPower PDU20SW8RNET User Manual download pdf (Page 113)

111

The administrator can be notified when an event occurs. See Event Action/Notification Recipient page for more

details about the notification methods and recipient assignment.

 Initiated: Determines whether to send a notification or not and sets the notification delay. If the event is cleared

within the notification delay, the notification of the occurrence and the event cleared notification will not be sent.

 Repeat: Determines whether to send one additional notification after the initial notification. Only events which are

of severe-level and warning-level type support a repeat notification.

Event List

The Event List displays power events. The events are divided into below categories:

System

 Power consumption is too high. Power system consumes has been exceeded the high threshold.

 Power consumption is too low. Power system consumes has been violated the low threshold.

Group

 Power consumption is too high. Power entire devices consume has been exceeded the high threshold.

 Power consumption is too low. Power entire devices consume has been violated the low threshold.

UPS

 Remaining runtime will be exhausted. Remaining runtime will be exhausted and is not sufficient for a complete

shutdown.

 System is overheated. The sensor measures the UPS temperature exceeds the high threshold.

 Network communication is untouched. Center cannot establish communication with UPS on the network or

established network communication has been interrupted.

 UPS is faulty UPS has malfunctioned in internal. UPS may not be operating as user’s desire and cannot afford

power protection.

 Utility power failure Utility power failure, battery power will be supplied.

 Battery is not present Batteries are not present; the UPS cannot provide battery power in this condition.

 Available runtime is insufficient There is not sufficient runtime for a complete shutdown even if battery has fully

recharged.

 UPS is fatal abnormal UPS is working abnormally due conditions includes as following list that may cause UPS

shutdown and no longer supply power soon or even immediately.

 Power consumption is too high Power the specific UPS consumes has been exceeded the high threshold.

 Power consumption is too low Power the specific UPS consumes has been violated the low threshold.

 Shutdown initiated A computer which connects with UPS initiated the shutdown process. The computer will shut

down or enter hibernation.

 Battery has fully charged Battery has fully charged. The capacity of battery is full.

PDU

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 113