CyberPower PDU20SW8RNET User Manual download pdf (Page 46)

 MAC Address: The MAC address of the UPS RMCARD, PDU or Agent’s network interface.

 IP Address: The IP address of the UPS RMCARD, PDU or Agent’s network interface. Click the hyperlink to open

the web interface of the UPS RMCARD, PDU or Agent.

 UPS on Source A: Indicates which UPS connects to input source A of ATS.

 UPS on Source B: Indicates which UPS connects to input source B of ATS.

 Environment Sensor: Indicates whether the environment sensor has been installed on the UPS/PDU/ATS.

Note: When the sensor cannot be detected anymore, it will be annotated No Response. Users can click the

Uninstall to reflect it if it had been removed physically from the UPS/PDU/ATS.

Note: Not all models provide the same information. The information displayed will vary by model.

Configuration

In order for computers which have been installed PowerPanel Business Edition Client software to be aware of the

state and get shutdown protection from the power event of UPS or PDU, the correct connection type, the address and

connected outlet must be assigned properly in the Power/Configuration page.

Power/Configuration page

Network communication between a computer and UPS or PDU can be established by assigning the correct power

connection, address of UPS or PDU, and a computer connected outlet of UPS or PDU. The details are described as

following:

 Power Connection: Assigns the actual power connection how a computer connects to UPS or PDU. The power

connections include as below:

 UPS: Indicates the computer is plugged in one single UPS.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 132 133

No comments

CyberPower PDU20SW8RNET User Manual Page 46